Description

• Power installed anchor rod used with solid hub or socket drive power installed screw anchors
• Select the appropriate rod diameter based on the ultimate load requirement and length
• Typically installations will use one 7 foot (2.1m) rod
• The rod threads must match the hub tapped hole
• A 5/8″ diameter rod is used with any solid hub or socket drive power installed screw anchor designated for a 5/8″ rod
• The 3/4″ and 1″ diameter rods have the same threads and are used for any solid hub or socket drive screw anchor designated for 3/4″ or 1″ rod
• Hot Dip Galvanized per ASTM A123