Description

• A steel fixture used where an offset from utility pole is required.
• Bracket provides an offset to hang a 5/8″ Machine Bolt.
• Brackets are used in conjunction with a straight suspension clamp (Part Number 5080), and a 5/8″ Machine Bolt.
• Bracket is mounted with 5/8″ or 3/4″ machine bolts at the upper position and two 1/2″ drive screws at the lower position.
• Angle size is 3″ x 2-1/2″ x 1/4″.
• All components are hot dip galvanized to meet ASTM Specification.